Before Calling Your After Sales Service - NEW POL NWTT850W Manual De Instrucciones

PART -5

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not operating as expected, check the solutions listed below before
calling an electrician or the after sales service.
What to do if your refrigerator does not operate:
Check that:
• Your fridge is plugged in and switched on,
• The fuse is not blown and there is not a power cut,
• The thermostat setting is in the on « • » position,
• The socket is no longer functioning. To check this, plug in an appliance that you know is
working into the same socket.
What to do if your refrigerator performs poorly:
Check that:
• You have not overloaded the appliance,
• The doors are fully closed,
• There is no dust on the condenser,
• There is enough space for air circulation at the rear and side of the appliance.
If there is noise ;
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling
sound) even when the compressor is not running. This is normal. If these sounds are different
check that:
• The appliance is level,
• Nothing is touching the rear of the appliance,
• Items on or in the appliance are vibrating.
If there is water in the lower part of the refrigerator:
Check that:
The drain hole for the defrost water is not clogged (use thedefrost drain plug to clean the
drain hole).
If your fridge is not cooling enough;
Your fridge is designed to operate within specific ambient temperature ranges, according
to the climate class stated on the information label. We do not recommend operating your
fridge outside the stated temperatures value limits.
Climate class
T
ST
N
SN
EN - 12 -
Ambient temperature (°C)
Between 16 and 43 °C
Between 16 and 38 °C
Between 16 and 32 °C
Between 10 and 32 °C