Belkin F1UP0001 Manual Del Usuario página 14

P74390ea_F1UP0001_man.qxd
Configure Computers to Print to the Print Server
1. Install Port Monitor software on each computer by running "instport.exe" from
the CD.
2. Configure the Belkin Port Monitor on each computer printer driver to point to
the correct Print Server as follows:
a) In Windows, select the printer's properties for the printer connected to
the Print Server and select the "Port" tab, select the Belkin port, and
click "Configure Port...".
b) On the "Belkin Port: Properties" window, click "Locate Servers".
c) On the "Available Servers" window, select the Print Server you want to
print to.
1/6/04 3:09 PM
SETUP FOR ADVANCED USERS
10
Page 10
N