Arcam PA720 Manual De Instrucciones página 23

PA410
All specification values are typical unless otherwise
stated. Arcam has a policy of continuous improvement
for its products. This means that designs and
specifications are subject to change without notice.
E&OE.
00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 21 00_SH299_EN-FR-DE-NL-ES-RU-IT-CN-KO.indb 21
Continuous power output at at 0.2% THD, per channel
Four channels driven, 4Ω / 8Ω, 1kHz 70W / 50W
Two channels driven, 4Ω / 8Ω, 1kHz 90W / 60W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.003%
Inputs
Input sensitivity 50W / 8Ω 560mV RMS
Signal/Noise ratio (A-wtd) 50W / 8Ω 106dB
Input impedance 10kΩ
Frequency response 20 - 20kHz +/-0.2dB
General
Mains voltage 110–120V or 220–240V, 50–60Hz
Maximum power consumption 700W
Low power standby consumption 0.5W
Network standby consumption 2W
Dimensions W x H x D (including feet, 433x325x105mm
control knob and speaker terminals)
Weight (net) 10kg
Weight (gross) 11.5kg
EN-21
EN
29/01/2020 13:11:37 29/01/2020 13:11:37