Dexter 20VJS2-28.1 Manual De Instrucciones página 324

FR FR
2. SAFETY INSTRUCTIONS
ES ES
J. Keep hands away from the sawing area. Do not reach under the
PT PT
workpiece. Contact with the saw blade can lead to injuries.
K. Only bring the power tool into contact with the workpiece when
IT IT
switched on. Otherwise there is danger of kickback if the cutting tool
EL EL
jams in the workpiece.
L. Ensure that the footplate always rests securely while sawing. A
PL PL
jammed saw blade can break or lead to kickback.
M. When the cut is completed, switch off the power tool and then
RU RU
pull the saw blade out of the cut only after it has come to a
standstill. In this manner you can avoid kickback and can place down the
UA KZ
power tool securely.
N. Use only undamaged saw blades that are in perfect condition.
KZ UA
Bent or dull saw blades can break, negatively influence the cut, or lead to
kickback.
RO RO
O. Do not brake the saw blade to a stop by applying side pressure
after switching off. The saw blade can be damaged, break or cause
BR BR
kickback.
P. Use suitable detectors to determine if there are hidden supply
EN
EN
lines or contact the local utility company for assistance. Contact
with electric cables can cause fire and electric shock. Damaging gas lines
can lead to explosion. Breaking water pipes causes property damage.
Q. In case of damage and improper use of the battery, vapours may
be emitted. Ensure the area is well-ventilated and seek medical attention
should you experience any adverse effects. The vapours may irritate the
respiratory system.
R. Do not open the battery. There is a risk of short-circuiting.
S. The battery can be damaged by pointed objects such as nails or
screwdrivers or by force applied externally. An internal short circuit
may occur, causing the battery to burn, smoke, explode or overheat.
T. Only use the battery with products from the manufacturer. This
is the only way in which you can protect the battery against dangerous
overload.
324