Dexter 800AG2-125.5 Manual De Instrucciones página 208

Please use grinding protective cover for grinding operation.
Grinding and Surface Processing
In order to grind surface, you should use a coarse abrasive disk with a sunken
centre.
You can use the abrasive disks with diameter of 125mm. The maximum thickness
of disks is 6mm.
Mounting the Wheels /Disks
Place the back ange A over the spindle making sure that it ts tight.
Place the grinding or cutting disc B on the top of the back ange, ensuring the
bore ts into the step of the ange.
Mount the concave recess side of the external ange C over the spindle.
Press the spindle lock button to lock the spindle rmly, then tighten the external
ange with the spanner in clockwise direction.
Allow the angle grinder to run in idle at least 1 minute with the grinding or
cutting disc correctly assembled, a vibration disc should be immediately replaced.
B
(Thick)
A
C
208
A
B C
(Thin)
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN