Inglesina otutto Manual De Instrucciones página 30

INSTRUCTIONS
RELEASING THE SEAT UNIT FROM THE FRAME
fig. 33 Press both handles (R3
seat unit from the frame.
WARNING: never fit/release the seat unit from the frame
with the baby inside.
BACKREST ADJUSTMENT
fig. 34
push the lever (R4) to lower the backrest.
FOOTREST ADJUSTMENT
fig. 35 Operate levers (R5) to adjust the footrest height.
SAFETY BELTS
fig. 36
position is not correct, extract the belts from the first pair of
-
lets at the same height.
fig. 37
the ends of the waist one.
fig. 38 Fasten the ends of the waist belt to the central buckle.
fig. 39
rings (R6) and, when being used, it must be adjusted in order
fig. 40
CAUTION! The inobservance of this precaution may result
in the falling or sliding out of the baby with a resulting
risk of injury.
BUMPER BAR ADJUSTMENT
fig. 41 Press the buttons (R7) and adjust the bumper bar to
the desired position until hearing a CLICK, which confirms its
correct hooking.
FITTING THE HOOD
fig. 42 Insert the flaps (R8) in the proper openings and fasten
all press studs to the backrest.
REMOVING THE LINING
provide for its correct maintenance.
fig. 43 Extract the footrest from the supports (R9) and un-
hook all buttons (R10) of the covering.
fig. 44 Extract the waist strap from the side rings (R6
attention to let the first teeth of the buckle pass through the
fig. 45 Pass the back straps and the crotch strap through the
CAUTION! Make sure that the lining has been properly
reassembled before use.
HUGGY
FITTING THE HUGGY SEAT TO THE FRAME
fig. 46 The HUGGY seat fits the frame thanks to the EASY
hearing a CLICK, which confirms its correct hooking.
CAUTION: make sure that the seat unit is always firmly
engaged before use.
RELEASING THE SEAT FROM THE FRAME
fig. 47 Press lever (S1).
fig. 48 Lift up the seat from the frame.
SEAT FACING THE MUM OR THE STREET
fig. 49
the mum or the street.
30