Measurement Menu - MZ electronic EV-030 Instrucciones De Uso

Measurement menu

Use the (DOWN) or
Reset Measurement
Resets the chain measurement value (0.0).
Units
Selects the unit of measurement:
Feet/ inches
Metres / centimetres
Exit
To return to the settings menu.
Alarm and functions menu
Use the (DOWN) or
Up Alarm
It is possible to enable the function and
establish the height at which the anchor-
winch stops; after which it is only possible to
give pulsed commands.
Settable values: 1.0 - 1.5 - 2.0...5.0 (metres
or feet).
Auto Down
Enables the automatic anchor lowering
procedure, at the desired height, with the
pressing (for at least 3 seconds) of the keys
and .
Settable value: 5 - 10 - 15...40 (metres or
feet).
Load Default
EV-030
(UP) key to move around the parameters.
Select with
Confirm with
Select with
Confirm with
Confirm with
Alarms & Functi
U p A l a r m
A u t o D o w n
L o a d D e f a u l t
E x i t
(UP) key to move around the parameters.
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
= Yes = No
= Feet = Metres
3 . 0
O f f
N o
23
English
Rev. 13 – 2013