General Safety; Noise And Vibration Information - Festool RS 200 EQ Manual De Instrucciones

Orbital sander
Technical data
Power
Speed
Working strokes
Sanding stroke
Sanding shoe
Weight according to
EPTA-Procedure 01:2014
The specified illustrations can be found at the beginning of the operating instructions.
Symbols
Warning of general danger
Wear a dust mask!
Wear protective goggles!
Wear ear protection!
Read the Operating Instructions/Notes!
Protection class II
1 Intended use
As specified, the machines are designed for sand-
ing wood, plastic, metal, composite materials,
paint/varnish, filler and similar materials.
Materials containing asbestos must not be pro-
cessed.
For reasons of electrical safety the machine must
not be damp nor operated in a humid environment.
The machine may only be used for dry sanding.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1

General Safety

WARNING!
instructions, illustrations and specifications
provided with this power tool. Failure to follow
all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
RS 200 EQ
330 W
4 000-10 000 rpm
8 000-20 000 rpm
2.4 mm
115 x 225 mm
2.5 kg
Read all safety warnings,
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specific safety rules
Always wear protective goggles because
of possible dangers when sanding.
- The manufacturer's handling and processing
instructions must be observed without fail if
explosive or self-igniting dusts are likely to oc-
cur during sanding.
- Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, espe-
cially inhaling them, can represent a hazard for
operating personnel or persons in the vicinity.
Comply with the safety regulations that apply in
your country. Connect the electric power tool to
a suitable extraction system.
To protect your health, wear a P2 protec-
tive mask.
- Only for AS/NZS: The tool shall always be sup-
plied via residual current device with a rated
residual current of 30 mA or less.
2.3

Noise and vibration information

Typically, the noise levels that are determined in
accordance with EN 62841 (see EC declaration of
conformity) are as follows:
Sound-pressure level
Sound-power level
Measuring uncertainty allowance
Wear ear protection!
Vibration emission value ah (vector sum for three
directions) and uncertainty K measured in ac-
cordance with EN 62841 (see EU Declaration of
Conformity):
11
RS 200 Q
330 W
10 000 rpm
20 000 rpm
2.4 mm
115 x 225 mm
2.5 kg
78 dB(A)
89 dB(A)
K = 3 dB