Warming Of Baby Bottles - Reer 3495 Instrucciones De Uso

An integrated thermostat
regulates the water temperature
from approx. 25º C to approx. 60ºC.
Attention:
Always place the equipment
onto a dry and even surface.
Ensure that there is enough water in
the container when warming food.
If a bottle or another container is
inserted, the water container has to be
filled completely with water.
The optimal heating temperature will
be reached in approx. 10-13 minutes
depending on the bottle size, but the
time can be longer or shorter.

4. Warming of baby bottles:

Baby and wide-neck bottles can be heated reliably and comfortably with the equipment. The water will be heated
by a heating plate in the equipment bottom and will transfer the warmth on to the food which needs to be warmed.
After reaching the pre-set temperature, the equipment will shut-off automatically.
Activation
Set the desired temperature range with the turn switch
(c) on the front of the equipment. The red control lamp
will glow. It is your signal that the equipment is working.
As soon as the desired water temperature is reached, the
control lamp will go off.
Tip: Temperature range 2 is suitable for small baby bottles (up to 125 ml)
Temperature range 3 is suitable for larger baby bottles (>125 ml)
Attention: It is imperative that you check the temperature of the content before you give the
bottle to the child. Shake the bottle in order to distribute the warmth evenly and pour 2-3 drops
of the content onto the back of your hand.
ATTENTION:
Please keep receipt and article number.
Possible guarantee claims or claims from a guarantee agreement
must be exclusively dealt with by the retailer.
Insert the baby bottle into the equipment and fill the
water container completely with water.
At the end of the warming process, take the bottle out
of the baby food warmer and turn the temperature
regulation switch anti-clock wise to the stop.
page 11