Technical Data; Charger Wall Mount; Service And Maintenance - Festool MXC Manual De Instrucciones

MXC
GB
The specified illustrations appear at the beginning
of the Operating Instructions.
4 Intended use
Charger MXC suitable
– for charging the listed battery packs:
– BP-XS
– only for internal use.
The user is liable for improper or non-in-
tended use.
5

Technical data

Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Charging times for
LiIon 1,5 Ah, 80 %/ 100 %
Permitted operating tempera-
ture range
Temperature monitoring
Safety class
6 Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
6.1 Charging the battery pack [1]
Charge only battery packs that are desig-
nated for use with the charger. (see Intend-
ed use)!
The LED [1-3] on the charger indicates the respec-
tive operating status of the charger.
LED yellow - lit continuously
Charger is ready to use.
LED green - flashing quickly
Battery pack will be charged with max. current.
10
MXC
220 - 240 V ~
50/60 Hz
10.8 V=
typ. 2.8 A
approx. 23/ 35 min
-10 °C to + 40 °C
via NTC-resistor
/II
LED green - flashing slowly
Battery Pack is charged to 80 % and will be charged
with further reduced current.
LED green - lit continuously
Battery pack is fully charged.
LED red - lit continuously
Battery temperature is outside the permitted range
(0 °C to 45 °C).
LED red - flashing
General fault display, e. g. incomplete contact,
short circuit, battery pack faulty, etc.
6.2

Charger wall mount

The charger MXC has two elongated holes on its
back. It can be mounted on a wall using two screws
(e.g. round head or flat head screw with shank di-
ameter of 5 mm) (see Fig. [1]).
7

Service and maintenance

Observe the following instructions:
– Keep the air slits on the machine and the charger
free and clean to ensure adequate cooling.
– Keep the contacts on the machine, charger and
battery pack clean.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
EKAT
Use only original Festool spare parts!
4
Order No. at: www.festool.com/service
5
3
2
1
8 Accessories
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
9 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble national regulations.
EU only: In accordance with European
Directive on waste electrical and electronic equip-
ment and implementation in national law, used
electric power tools must be collected separately
and handed in for environmentally friendly recy-
cling.
Information on REACh: www.festool.com/reach