Overview Of Safety And Care Information; Description And Contents; Warming Of Baby Bottles - Reer Simply Hot Instrucciones De Uso

1. Overview of the safety and care information
Congratulations on purchasing your new reer baby food warmer. We are sure that you will enjoy the quality of our
product for a long time. Please read all the instructions carefully.
Please take enough time to do this before using it for the first time. The instruction manual must always be kept
with the product and read before use.
Please take a few minutes to read
the safety information thorough-
General safety information:
ly. Follow the instructions in the
manual, because otherwise there
is the danger that the baby food
- Use the device exclusively in the home for its intended purpose. This device is not intended for
warmer becomes damaged or in
commercial use. This device is intended for use in private households only.
the worst case that either you,
- Do not use if there are any signs of defects.
your child or another person may
- Regularly check the function (particularly the rotary switch for the temperature control).
be endangered or injured.
- Before using for the first time, remove all the packaging material and unused components, so
that your child does not injure itself or swallow any of them.
- Only connect the appliance to voltages according to the nameplate on the base of the
appliance.
- Children must not play with the appliance.
- The device and its connections cable should be kept away from children under the age of 3.
- Children do not recognise the danger that can arise from handling electrical appliances. For this
reason, never leave children unattended.
- Persons (including children), who due to their physical, sensory or mental capacities or their
inexperience or lack of knowledge are not capable of using the appliance safely, should not be
allowed to use the appliance without supervision or instruction by a responsible person.
- For operation, the appliance must be placed on a dry and flat surface.
- Please ensure that there is enough water in the tank when warming food. If a bottle or other
container is inserted, the inside of the water tank must be completely filled with water.
- Never immerse the appliance in water or any other liquid and do not put in a dishwasher, but
instead clean with a damp cloth and washing-up liquid.
- Never operate the appliance without water and never move during operation.
- Disconnect the power supply after use in order to prevent unintentional continuous use.
- Do not use if the appliance or the power cable is damaged.
- Repairs should only be performed by a qualified specialist. Unprofessional repairs can lead to
considerable danger for the user - this also includes changing the power cable.
- The power cord of this device must not be replaced. Dispose of the device if the cord is
IMPORTANT:
damaged.
You can only use the reer baby
food warmer without hesitation - Do not submerge the device, its power cord or plug in water or other liquids.
if all the points listed here are
- The cleaning and maintenance of the device must not be done by children, unless they are 8
ensured.
years or older and are supervised.
CAUTION: In order to avoid hanging cables, for safety reasons the appliance has a practical cable
winder on the base of the appliance.
- 6 -
2. Maintenance and care instructions
- Disconnect the appliance from the power supply before cleaning or descaling!
- Do not clean the appliance when it is hot!
- Do not use any abrasive cleaning agents or sharp objects when cleaning, as these can attack the surface of the appliance.
- Descale the appliance after several uses (depending on the hardness of your water) using, for example, dilute vinegar (hot mixture of approx. 100ml
water and 100ml vinegar), in order to warrant perfect functioning of the appliance. Allow to work for approx. 30 minutes, then clean with a damp cloth.

3. Description and contents

This appliance allows rapid, reliable and automatic heating of baby food and other suitable foods by heating water. This appliance allows rapid, reliable and automatic heating of baby food and other suitable foods by heating water.
The water is heated through a hotplate in the base of the appliance and transfers its heat to the food to be warmed. The water is heated through a hotplate in the base of the appliance and transfers its heat to the food to be warmed.
After reaching the preset temperature range, the appliance switches off automatically.
a) Base of the appliance with integrated hotplate
b) Indicator light for operation
c) Setting for the temperature range (rotary switch)

4. Warming of baby bottles:

The appliance comfortably and reliably warms standard and wide neck bottles. The water is heated by a hotplate in
the base of the appliance, which transfers its heat to the food to be warmed.
Starting up
To allow steam to escape from the bottle, remove the sealing disc between bottle
and teat. Place the baby bottle in the appliance and fill the water tank with water up
to about 1 cm from the top edge of the tank.
Turn the rotary switch (c) at the front of the appliance to the desired Turn the rotary switch (c) at the front of the appliance to the desired
temperature range. The red operating light (b) lights up. This signals to you temperature range. The red operating light (b) lights up. This signals to you
that the appliance is in operation. The operating light (b) goes off at the end that the appliance is in operation. The operating light (b) goes off at the end
of the warming period.
Note: You can also keep baby food warm for a certain length of time using the baby food warmer.
You can also keep baby food warm for a certain length of time using the baby food warmer.
However, this should not exceed one hour for microbiological reasons (formation of germs). To
do so, simply leave the bottle or jar in the appliance after warming up, and switch the rotary
switch (c) to the position for keeping warm.
Remove the bottle from the baby food warmer and turn the rotary switch (c) Remove the bottle from the baby food warmer and turn the rotary switch (c)
for the adjustment of the temperature back to the Off position at the end of for the adjustment of the temperature back to the Off position at the end of
the warming procedure. Unplug the appliance from the socket and pour the the warming procedure. Unplug the appliance from the socket and pour the
water out of the baby food warmer. water out of the baby food warmer.
Caution: Before you feed your child, you must check the temperature of the contents. To do this,
shake the bottle to distribute the heat evenly throughout and pour 2-3 drops of the contents onto
the back of your hand.
a a
b b b
An integrated thermostat regulates the
water temperature
Caution:
Always place the appliance on a dry
and flat surface. Please ensure that
there is enough water in the tank when
warming food. If a bottle or other con-
tainer is inserted, the water tank must
be completely filled with water, up to
1 cm from the top edge of the tank.
The optimal temperature of the food is
reached after about 6-8 minutes. The
duration may vary depending on the
temperature of the water, the ambient
temperature, the size and material of
the bottle.
Symbols:
Appliance is switched off
Warming of milk bottles and
baby jars
Warming of milk bottles
and small baby jars
Warming of large
baby jars
- 7 -
c