Publicidad
Idiomas disponibles
Idiomas disponibles
Filter for the adjustment of the natural equilibrium between calcium and carbonic acid in aquaria.
For saltwater aquaria from 200 up to 1,000 l.
With the purchase of this unit, you have selected a top quality product. It has been specifically designed for
aquaristic purposes and has been tested by experts. With this unit, you are able to adjust the calcium level as
well as the carbonate hardness in your saltwater tank efficiently and to keep it on an optimum level.
1. Product description
The Aqua Medic Calciumreactor KR Blue consists of the following parts:
- Reaction vessel (height: 35 cm, volume approx. 5 l)
- Filling with Aqua Medic Hydrocarbonate, coarse grain
- Drip counter (14)
The water inlet, outflow, the injection port for CO
the reactor.
Available spare parts: Please refer to www.aqua-medic.de.
2. Theory
The equilibrium between calcium and carbonic acid in a seawater aquarium is destroyed due to the biological
activity of the animals. For the construction of their calcareous skeletons, they take calciumcarbonate out of the
water. As a result, it comes to a lack of calcium and an increase of the pH-value. The Aqua Medic
Calciumreactor KR Blue is a module for adjusting the natural equilibrium between calcium and carbonic acid
in the aquarium. It is filled with Hydrocarbonate, a highly purified calciumcarbonate. Because this
calciumcarbonate is not soluble at pH-values common in saltwater tanks, it is necessary to dose the CO
5
Operation Manual ENG
and the circulation pump are placed in the lid at the top of
2
1. Filter housing
2. Filter basket
3. Handle for filter basket
4. Round grid
5. Rubber sealing for pressure pipe
6. Lid incl. pump and plug
7. Housing's sealing
8. Cap for pump housing
9. Reducing nozzle
10. Water inlet 6 mm
11. CO
12. Water outlet 6 mm
13. T-piece for water inlet (no picture)
14. Retaining plate incl. bracket and drip
15. 6-mm-connecting hose (no picture)
15. Sealing clamp
16. Clip for sealing clamp
17. Trim
18. Rubber foot
19. Screw for rubber foot
20. Bottom plate
21. Sealing ring for PG 13,5 sealing cap
22. Sealing cap PG 13,5
24. Port with thread PG 13,5 for pH-probe
-connection 6 mm
2
counter (no picture)
(probe not included)
into
2
Publicidad
