Power Off; Cleaning Mode Selection; Spot Cleaning Mode - ECOVACS ROBOTICS DEEBOT M82 Manual De Instrucciones

Power OFF

6
Pause DM82. Move the Side Power Switch to
the OFF position.
* When DM82 is not cleaning, it is suggested to
keep it powered ON and charging instead of
powered OFF.

3.3 Cleaning Mode Selection

DM82 has several cleaning modes to choose from to effectively clean different floors. Cleaning
modes are selected using the Remote Control or the AUTO Mode Button on the robot.
*
not, press the AUTO Mode Button on the robot or the START/PAUSE Button on the Remote Control
to wake up the robot.
1 AUTO Cleaning Mode
This is the most commonly used mode. In AUTO Cleaning Mode, DM82 cleans in a straight line and
changes direction when it meets an obstacle.

Spot Cleaning Mode

2
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
DM82 stops or resumes auto cleaning when it
completes spot cleaning.
3. Operating and Programming
11
EN