Leggett & Platt Premium Serie Manual De Usuario página 7

STEP 2
Remove the hardware box. Cut zip-tie and remove
mattress retainer.
STEP 3
Install (4) legs into the base frame. Simply screw each leg
into a tapped hole at the corner of the base frame (FIGURE 1).
Push pin in to adjust leg height (achieve leg height of 6 inches
to 10 inches).
FIGURE 1
PUSH PIN IN
TO ADJUST LEG
HEIGHT
(6 INCHES TO
10 INCHES)
STEP 4
Carefully lift the adjustable base from the shipping carton,
keeping the unit top-side-down. Uncoil and extend out
power cord from base.
WARNING WARNING
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE MECHANISMS.
INSTALLATION INSTALLATION
RECOMMENDED FOR HANDLING AND
LEGS – SCREW
INTO TAPPED
HOLE AT EACH
CORNER
Prodigy™ 2.0 Adjustable Base Owners Manual 99301584-c
WARNING WARNING
AT LEAST TWO PEOPLE ARE
MOVING ADJUSTABLE BASE.
CAUTION CAUTION
CAUTION
DO NOT ATTEMPT TO SCREW
LEGS INTO ANY OTHER INSERTS.
THIS WILL DAMAGE PRODUCT.
7