Important - Leggett & Platt Premium Serie Manual De Usuario

MATTRESS RETAINER INSTALLATION (OPTIONAL)
Mattress is equipped with a MicroHook™ system
to captivate the mattress (FIGURE 4), but if
desired a mattress retainer can also be used. If
installing a mattress retainer, proceed to Step 9.
If not installing a mattress retainer, proceed to
Step 10.
FIGURE 4
Micro-Hook™
SYSTEM
STEP 9
Install mattress retainer at the foot end of the adjustable base as follows:
a. Locate grommeted holes at foot end of base.
b. Place mattress retainer ends into grommeted holes in top surface
of adjustable base (FIGURE 5). Press down until horizontal retainer
section is fl ush against base.
FIGURE 5
MATTRESS
RETAINER
STEP 10
Install mattress on adjustable base.
Typical Prodigy™ 2.0 adjustable base installation is now complete.
INSTALLATION
THIS PRODUCT SHOULD NOT BE USED WITH
EITHER A DUST RUFFLE OR A MATTRESS
ENCASEMENT. IF EITHER A DUST RUFFLE
OR MATTRESS ENCASEMENT IS NEEDED,
THEN A MATTRESS RETAINER BAR IS
Micro-Hook™
DETAIL
Prodigy™ 2.0 Adjustable Base Owners Manual 99301584-c

IMPORTANT!

REQUIRED.
9