Operation - IFM Electronic AC015S Instrucciones De Uso

Addressing
When mounted and wired the pcb can be addressed with the cable
(E70032) via the addressing unit AC1144.
Assign a free address between 1 and 31. At the factory the address is
set to 0.

Operation

Check the reliable functioning of the unit. LED display:
• LEDs 1 yellow:
• LED 2 green:
• LED 2 red lit:
• external LED
alarm output (X1-X2):
Outputs switched (S-I1, S-I2)
Voltage supply ok. (PWR)
AS-i communication error, slave does
not participate in the "normal" exchange of
data, e.g. slave address 0 (FAULT)
alarm output O-1 (unsafe)
(through the host system the alarm
output LED can be set as a static or
dynamic output)
10