TECshow COSMO GO 12 Manual De Usuario página 6

6. DMX
The light is available to receive the DMX512
signal, connect the DMX connector to the panel
which marked with "DMX IN", and connect it to
the next light. Then, connect to the "DMX IN" of
next light from the "DMX OUT". The DMX signal
terminator is recommended when the lighting
DMX Channel Form
Channel
P. 6
Tecshow Cosmo Go 12 | English version
Value
0-10
11-50
51-100
CH1
101-150
151-200
201-255
0-39
40-49
50-59
60-69
70-79
CH2
80-89
90-99
100-109
110-119
120-129
signal is connecting. It will avoid to interfere the
signal which caused by the electrical noise, DMX
terminator is a XLR connector, connect with a 120Ω
resistor between the pin 2 and pin 3 of the XLR
connector, and connect it to the OUTPUT socket of
the final light. See picture:
Description
No function
Macro A1
Macro A2
Macro A3
Macro A4
Macro A5
All color
Red
Green
Blue
Yellow
Cyan
Purple
White
Red+Green
Red+Blue