Connecting Microphone And Headphones; Connecting The Power Cord - Pioneer SVM-1000 Manual De Instrucciones

CONNECTIONS

CONNECTING MICROPHONE AND HEADPHONES

Microphone
A microphone with XLR-type or Ø 6.3 mm phone-type plug can be
connected to the MIC 1 connector on the operation panel (upper) .
The MIC 2 jack on the connection panel (rear) can be used to
connect a microphone with Ø 6.3 mm phone-type plug.
• When using a microphone, set the operating panel's MIC switch
to [ON] or [TALK OVER], and adjust the LEVEL dial as
necessary.
When not using a microphone, it is recommended to set the
MIC switch to [OFF] and rotate the LEVEL dial fully
counterclockwise to the [–∞] side.
Microphone 1
Microphone 2
Headphones
The PHONES jack on the operating panel (upper) can be used to
connect headphones with a Ø 6.3 mm stereo phone plug.
12
En
USB
CH 1
VIDEO
EX
CH 4
MIC
MIC 1
MIC2
MIDI
OUT
USB
Headphones
External video connector
A camera, DVD player or other video output device can be
connected to the CH 1/CH 4 video input connectors on the
operating panel (top).
Video cameras and
devices

CONNECTING THE POWER CORD

Connect the power cord last.
When all connections are completed, connect one end of the
furnished power cord to the AC inlet on the rear panel, and the
plug on the other end to a household AC outlet, or the auxiliary
power outlet on an amplifier. Use only the furnished power cord for
this connection.
9
HEAD PHONES 8
7
MONO SPLIT STEREO
6
5
4
MIXING
3
2
1
0
CUE MASTER
LEVEL
CROSS FADER
ASSIGN
0
A THRU B
PHONES
PROFESSIONAL SO
SVM-
USB
CH 1
VIDEO
EX
CH 4
MIC
MIC 1