Introduction; Features; Application - Phonic JUBI 12A Manual De Usuario

INTRODUCTION

Congratulations on your purchase of the Phonic Jubi
12A or Jubi 15A active loudspeakers. The Jubi's 700
Watt (continuous) amplifier uses both Class D and AB
technology to produce up to a shattering 126 dB maximum
SPL. This provides sufficient power for a wide range of
venues, large and small. Jubi's stylish polymer enclosure
also improves acoustical accuracy by minimizing distortion
and diffraction. Finally, reliability and durability was the
paramount factor throughout the Jubi's development.
With 700 Watts of ground shaking power, a 2-channel on-
board mixer, custom engineered transducers, and great
versatility, the Jubi active loudspeakers simply excel.
Woofers and Tweeters Engineered Right
Unlike many other speaker manufactures that use pre-
assembled OEM woofers and tweeters, Jubi transducers
are designed from scratch, in-house, by Phonic.
Everything, from the cone pulp formula and the curvature
of the tweeter's titanium membrane to the characteristic
of the magnetic field, is uniquely Phonic, uniquely Jubi.
Jubi's state-of-the-art 12" or 15" woofer has a distinctly
high BL force factor and a long-throw extension which
produce marvelously deep and defined bass traditionally
unattainable in small enclosures. The 1" compression
tweeter and 95 degree conical horn complete the Jubi's
vivid, transparent sound signature.
Advanced Electronics. Advanced Reliability
With over 35 years of experience, Phonic has few
equals when it comes to advanced electrical engineering
technology. With the Jubi series, this cumulated expertise
is on display. Core features include:
● Time alignment and phase correction: In listening
tests, many notice that the Jubi seems more "real"
or more "live" than other speakers. This is because
Phonic's active electronics ensure that sounds from
the Jubi hit listeners' ears at the precise moments the
original recording intended.
● High Dampening Factor and Woofer Stabilization:
The Jubi has a high amplifier dampening factor to
ensure that the woofer reaches optimal excursion.
Additionally, Phonic engineers added circuitry to
manage the speaker's electrical feedback, in effect,
stabilizing woofer movement. The high amplifier
dampening factor and stabilization circuitry give the
Jubi its spectacular bass depth and clarity.
● Transducer Protection: Active electronics oversee
tweeter and woofer excursion, preventing audio
artifacts, distortion, and speaker damage.
● 4th order, phase-accurate, Linkwitz-Riley crossover
● Thermal protection: Precautionary feature that cuts off
the Jubi in case of overheating.
With experience and technology comes excellent
performance and reliability. But you can never be too
careful. As of the launch date, the Jubi has logged more
than 1000 hours of real world and lab tests, guaranteeing
a remarkable level of reliability. From heated ovens,
freezing subzero rooms, high humidity chambers, to
electrical voltage spikes, the Jubi has endured it all.
JUBI 12A / JUBI 15A

FEATURES

● Remarkable sound, remarkable power, and remarkable
style in a lightweight, durable enclosure
● 700 Watts of continuous power using Class D technology
● 124 or 126 dB maximum sound pressure level
● 12" or 15" woofer matched with 1" compression tweeter
● Flat frequency response between 53/56Hz and 20kHz
● 2 channel onboard mixer: mic channel featuring an
XLR input and line channel with 1/4" TRS phone jack
● Send speaker's main signal off to additional speakers
or amplifiers through a balanced XLR output connector
● 4th order phase-accurate Linkwitz-Riley crossover
● 35mm pole mount for extended audience reach
● Impact resistant polymer enclosure with internal
bracings
● Tour grade steel grille (1.2 mm)
● Rotary EQ controls for high and low frequency audio

APPLICATION

35mm mounting point
1