Instructions For Operation; Routine Maintenance - albatros Vasche Manual De Uso

Instructions for operation

Congratulations
We are delighted that you have chosen this
Albatros appliance, which is designed and built
using the most sophisticated technology.
Our wide range of functional and reliable
hydromassage tubs offers the ideal way of
maintaining a feeling of well-being, and will help
you to achieve perfect harmony and equilibrium,
re-vitalizing the body and relaxing the mind.
A combination of elegant design and ergonomic
shape, together with the latest in technology, will
ensure maximum comfort as you relax to enjoy
the gentle or vigorous effects of a hydromassage
system that can be adjusted exactly as desired
and is designed to suit users of all builds.
Your Albatros tub will enable you to adjust the
hydromassage action exactly as desired by
regulating the intensity of the jets and their
direction, selecting the various functions and
adjusting the water-air mix to suit your personal
preference.
This manual, in which the fi rst section is common
to all versions of hydromassage tubs, also
contains specifi c information about the operation
and disinfection procedures for each individual
model.
1 How to use the hydromassage system
(Instructions valid for all models)
This paragraph describes the procedure
necessary to operate the hydromassage system,
as well as a number of practical suggestions.
Please remember that it is advisable to allow at
least two hours after a meal before a relaxing
massage.
First, switch the appliance on using the main
ON/OFF switch. Then fi ll the tub until the level
of the water is 5 - 6 cm above the hydromassage
nozzles.
The ideal water temperature for an effective
hydromassage is very slightly above normal
body temperature, i.e. about 37°C. If you add
essences to the water, read the instructions on
the product with care; if these products are not
specifi cally designed for use with hydromassage
systems, they may produce excessive foam when
the water is agitated.
To start (or stop) the hydromassage cycle, refer to
the specifi c operating instructions in the second
section of this manual.
The duration of the hydromassage cycle depends
on personal taste; however it should be borne
in mind that long hydromassage treatments may
lower the blood pressure or cause excessive
muscular relaxation.
When using the hydromassage system for the
fi rst few times, it is advisable to limit the duration
of the cycle to between 10 and 20 minutes, then
to work up to the standard duration for the cycle
(30 minutes), which is more than suffi cient to
obtain the benefi cial effects of the hydromassage
treatment.
After a hydromassage session, check that all
the nozzles are open and exit the tub. Start the
disinfection system to clean the internal parts of
the hydromassage circuit (refer to the instructions
relative to the disinfection system fi tted to the
appliance).
It is advisable to sit or lie down in a comfortable
position for ten to twenty minutes after a
hydromassage in order to enjoy the fullest
effect.
2

Routine maintenance

Cleaning the tub
The tub is built using materials which are easy
to clean and inhibit the build-up of bacteria on
the surface.
It is advisable to clean the tub regularly, preferably
using the specifi c products available from our
authorized dealers and Service Centres.
If you prefer to use other products, the following
recommendations should be followed:
1) Always use a soft cloth; never use abrasive
2) Never use powder detergents. Always use
3) Never use acetone, ammonia or products
4) Stubborn stains can be removed using
No
No
5) To remove scale stains from the surface, use
Cleaning the Sanijet nozzles
In order to maintain perfect effi ciency, the nozzles
should be dismantled and cleaned at regular
intervals in order to remove any sediment or
scale.
Use the special wrench to rotate the nozzle
counter-clockwise until the internal ring can be
removed.
Extract the nozzle, dismantle and clean.
To replace the nozzle, perform the same
procedure in reverse.
Uso Vasche IDROP / DIGIT - Code 10004904 - Edition 3 - 09/2007
1
cleaning products (pads etc.).
good-quality liquid detergents which contain
no alcohol or ammonia.
containing these substances, as these can
seriously damage the tub. Similarly, never
use products containing formic acid or
formaldehyde.
liquid detergent, silver polish or toothpaste
(depending on the type of stain) and rubbing
gently with a soft cloth.
lemon juice or vinegar (hot if possible) and
rub gently with a soft cloth.
English