SLV 232860 Instrucciones De Servicio página 3

ENGLISH
OPERATING MANUAL FOR
LED SPOTS
232860 / 232864 / 232870 / 232874 / 232880 /
232884 / 232890 / 232894
Read this short manual carefully and keep it accessible for further
reference!
SAFETY MESSAGES
Disregard of the safety messages may lead to danger of life, burning or
fire!
• Installation, mounting or works on the electrical connection may only be
carried out by an approved electrician.
• Type Z attachment: The connection cord cannot be replaced when
damaged. Do not operate the product with a damaged connection cord. In
this case the complete product must be disposed.
• The cable of the luminaire may not be placed underground.
• Do not look directly into the light source.
• The product may not be modified or converted.
• Do not hang or fasten anything on the product, especially no decoration.
• Do not cover the product - provide free air circulation.
• The luminaire may only be operated with a complete and intact protection
glass.
• Openings providing aeration or drainage may not be covered.
• In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the fuse.
A malfunction exists when:
• visible damages appear.
• the product does not work properly (e.g. flickering).
• smoke, steam or crackling sounds appear.
• smell of burning is recognisable.
• an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
• This product is not intended to be used by children. Ensure that children do
not suffer any harm e.g. by burns from hot surfaces or by electrical shock.
Additional safety messages are indicated by this symbol:
USE AS DIRECTED
This product serves exclusively lighting purposes and may:
• only be used with a voltage of 220-240V ~50/60Hz.
• only be installed according to safety class I (one).
• only be operated when firmly mounted on a stable, even and tilt-fixed
surface.
• only be operated on normally or not flammable surfaces.
• not be exposed to strong mechanical loads or to strong contamination.
MAINTENANCE AND CARE
Light source
• The light source of this luminaire may only be replaced by the
manufacturer, an authorized service technician or a comparable qualified
person.
Care
• The following enviromental influences may have unwanted effects on the
surface of the product:
• acid rain and sour soil, high salt content in the air
• cleaning agents, fertilizer especially in flowerbeds
• thawing salt, other chemical substances (e.g. herbicides)
Protect the product by adequate means to avoid unwanted changes of the
surface.
Disconnect the product from the power supply and let it cool down, before
you clean the product.
• Clean the product on a regular basis using a slightly moistened, soft and fluff-
free cloth. Please also note additional supplied notes on maintanance and
care.
STORAGE AND DISPOSAL
Storage
• The product must be stored in a dry and clean environment. Do not strain
the product mechanically during storage.
After a damp or soiling storage the product may only be installed after
checking its condition by an approved electrician.
Disposal (European Union)
• Do not dispose the product with the regular household waste! Products
marked with this sign must be disposed according to the directive (WEEE,
2012/19) on electrical and electronic devices at local collection points for such
devices!
INSTALLATION
(only by an approved electrician)
Switch off the mains or respectively the connection lead before doing any
works!
Use only parts, which are supplied with the product or are described as
accessories!
Inspect the product for loose parts inside the housing. When there are loose
parts inside the housing and these are not explicitly described the product may
not be installed or operated.
Use the supplied fastening material only when it is suited for the installation
background. If this is not the case use only fastening material suiting the
installation background.
.
Unpacking
• Carefully take the product out of the packaging removing any transport
safeguards.
• Before disposal of the packaging material make sure that all components of
the product are removed.
Installation place
• The product is solely suited for installation on a wall.
• The detector functions optimally when installed at a height of 2,5 metres.
• LED react sensitive on high temperatures! Before installation pay attention to
the expected temperature at the place of operation.
The product may only be utilized according to IP65.
IP65: Protection against dust (dust-tight) - Protection against jetted water from
all directions.
Prepare the power supply lead according to valid rules for outdoor
installations.
Do not seal the product yourself, using additional silicon or another sealant.
Installation steps (read completely before installation)
• Install the luminaire as shown in the figure.
• The surface of the detector must not be damaged, e.g. by sharp objects.
• Electrical Connection
• Connect the plug with a suitable outdoor socket (i.e. SLV art-no. 227000).
Detection Adjustment
Factory setting: Sensor active, dusk mode, near distance mode, delay time 30
seconds
• Following settings (s. table) may be adjusted by pressing the keys. Settings
are confirmed by the light going on and off. Adjustments should not be
made at bright sunlight, strong air streams or high variation of
temperature.The luminaire has a memory function. The last setup will be
saved.
ON/
Here the normal light mode will be set.The detector is not activated.
Manual
override
ON/
Here the detection mode will be activated.
PIR
sensor
Here the luminaire will be turned off. The luminaire remains in
OFF
standby mode.
Day
Day mode: The detector is activated permanently.
mode
Dusk mode: The detector reacts when the illuminance is lower than
Dusk
mode
< 65lux.
Near distance: In this setting the detector captures movement
Near
distance
within 3-4 metres.
Far distance: In this setting the detector captures movement within
Far
distance
8-9 metres.
15 30 10
1 3 5
sec sec min
min min min
Here the operating time of the luminaire will be set. By triggering the detector
the luminaire will be switched on for the set time.
With repeated triggering within this time the operating time will be extended by
the same set time.
Check if the product functions properly and is securely fixed!
art.-no. 232860 / 232864 / 232870 / 232874 / 232880 / 232884 / 232890 /
232894 © 22.11.2017 SLV GmbH,
Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0
Technical Details are subject to change.
15 20
min min