Covering Installation - EdilKamin LOGO Instalación Uso Y Mantenimiento

g.
g.
B
K
g.
N X
K
B
S
N1
N2
g.
g. 9
N-X
V
B

COVERING INSTALLATION

g.
A
g.
X
N
g.
X
N
P
N1
g. 8
g.
T
ardware included
no. upper brackets for ceramic
no. upper brackets for ceramic
no. Flat ceramic ad ustment bracket ( - g. )
no. ngle ceramic ad ustment bracket ( - g. )
no. Self-tapping screws ,
no. Knurled pins
no. Screws 8
nr. Rubber spacers (
Fig.
his gure represents the stove after it has been unpacked.
Fig.
he stove is delivered with the metal part of the lower side
coverings ( ) alread assembled.
ASSEMBLY OF CERAMIC SIDE COMPONENTS
Fig.
- ppl the upper ceramic
part of the ceramic panels, with the engraved arrow facing the
front of the stove, securing them in the dedicated holes using
the pins supplied.
ote. the side ceramic components must be mounted with the
lower groove facing the front of the stove (S - g. ).
n addition, inside the L or R version is indicated.
Fig.
- Fi the at ceramic ad ustment bracket ( ) to the angle ce-
ramic ad ustment bracket ( ) using the .
screws supplied.
Fig. -
- ppl the previousl assembled brackets ( - ) on the upper
ceramic ing bracket (K), securing them in the dedicated
holes using the pins supplied.
Fig.
- ppl the lower ceramic
rear part of the ceramic panels, with the engraved arrow facing
the front of the stove, securing them in the dedicated holes
using the pins supplied.
Fig. 8 - 9
- Flank the lower part of the ceramic side, tting the lower ce-
ramic ing bracket (
of the stove.
- omplete the operation b oining the upper part of the cera-
mic side and screwing the brackets ( - ) into the holes on the
top (use the 8 screws supplied - ).
VERIFY THE CORRECT COUPLING OF THE SIDE
CERAMIC COMPONENTS WITH THE CAST IRON
SIDES, MAKING ANY NECESSARY ADJUSTMENTS
USING THE SCREWS (V) AND THE BRACKETS (N-X).
IF NECESSARY USE THE PADS (N2) SUPPLIED.
CERAMIC TOP ASSEMBLY
Fig.
lace the ceramic top ( ) centring it in the housings on the cast
iron top.
- 25
-
ing (K - g. - )
ing ( - g. )
9,
- g. )
ing brackets (K) on the top rear
9. self-tapping
ing brackets ( ) on the bottom
) on the pins ( ) present on the frame