Grammer MAXIMO Evolution Active Instrucciones De Montaje página 21

Installation instructions MAXIMO Evolution Active / MAXIMO Evolution Dynamic GB
Qualified personnel
These installation instructions offer basic information on proper technical
seat installation. The contents of the work procedures described are
intended for professionally educated technicians with profound product
knowledge gained through regular training. This level of knowledge is an
imperative requirement when performing the work and procedures
described in this document.
In order to avoid bodily injury, reduced operational safety or damage to the
seat resulting from improperly performed work, all information and
instructions, in particular the safety notes stated in chapter 1, must be read
carefully and strictly observed.
As an inevitable matter of fact, GRAMMER AG cannot evaluate all
situations and consequences that may bear a risk of injury for the persons
involved in the described work procedures. For this reason, it is absolutely
necessary that every person who carries out installation work at a vehicle
uses his/her professional knowledge to make sure that his/her own safety
will not be put at risk and that the selected type of installation will not cause
any negative effects, in particular with regard to technical safety.
For this reason, GRAMMER AG disclaims liability for any possible damage
of this kind.
Change notification
The seats are subject to continuous development. Please understand that
we must reserve the right to make changes in shape, equipment and
technical design. For this reason, the contents of these installation
instructions cannot be used to substantiate any possible claims.
01/2011 15