Stop The Machine; Adjust The Discharge Chute; Adjust The Chute Deflector; Led Headlights - GreenWorks Pro 060-0799-6 Manual Del Operador

7.3

STOP THE MACHINE

2
1. Release the bail lever(2) to stop the machine.
WARNING
Wait until the impeller fully stops before you start the
machine again. Do not quickly turn the machine off
and on.
WARNING
Remove the battery after you complete the work.
7.4

ADJUST THE DISCHARGE CHUTE

You can adjust the discharge chute 180° to change the
snow direction.
1. Turn the grip handle left to move the discharge
chute to the left.
2. Turn the grip handle right to move the discharge
chute to the right.
English
7.5

ADJUST THE CHUTE DEFLECTOR

2
You can adjust the chute deflector up and down to
change the throwing distance of the snow.
Release the bail switch before you adjust the chute
deflector.
Do not push the deflector so far forward that a gap
shows between the deflector and the chute.
1. Push and hold the trigger (1) on the chute deflector.
2. Move the chute deflector (2) up to increase the
snow distance.
3. Move the chute deflector (2) down to decrease the
snow distance.
7.6

LED HEADLIGHTS

Turning the headlights on：
1. Push and hold the safety switch button(1).
2. Pull the bail lever(2) in the direction of the handle
bar to turn the headlights on.
Turning the headlights off：
3. Release the bail lever(2).
9
1
WARNING
WARNING
2
1
EN