Changing The Oil - Jung JH 10 G-plus EX Instrucciones De Servicio

5.2 Changing the oil

NOTE
Change the hydraulic oil annually.
For reliable function, JUNG hydraulic oil
is recommended (1 litre container, order
number 94 040 028-E).
1
2
> Open the lowering screw (1).
> Lower the lifting piston (3) completely.
> Pull out venting valve (2).
> Tilt the jack.
> Drain hydraulic oil into a suitable container.
> Refill JUNG hydraulic oil, paying attention to the
filling level.
Filling height: 25 mm up to top edge of the tank.
© JUNG Hebe- und Transporttechnik GmbH
Jack
JH 6 G plus
JH 10 G plus kurz
JH 10 G plus
JH 15 G plus
JH 20 G plus
>Stick on venting valve (2).
>Close the lowering screw (1).
3
NOTE
If you carry out maintenance yourself, then please
dispose of your waste oil according to the valid regula-
tions or send it to JUNG (free delivery) in the original
JUNG container. Disposal is free of charge.
Jacks of the JH / JH EX / JHS series
Oil volume
0,4 l
0,45 l
0,6 l
0,85 l
1,15 l
- 61 -