Gaggia TITANIUM Instrucciones De Uso página 35

"∨ ∨ ∨ ∨ ∨ " to select the function:
RINSING
and enable it by pressing "MENU/OK". The following message
will appear:
RINSING
ON
Now press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ "to select
RINSING
RINSING
OFF
ON
and store the selection by pressing "MENU/OK".
We recommend selecting:
RINSING
ON
LANGUAGE
This function allows you to change the language of the display. You
can choose among Italian, German, Portuguese, Spanish, English, French
and Dutch. The appliance is normally set on the language of the country
it is to be sold in.
• After accessing the programming mode, press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select
the function:
LANGUAGE
and then enable it by pressing"MENU/OK".
The display will show:
LANGUAGE
ENGLISH
Press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the desired language and then press
"MENU/OK" to memorise it.
WATER HARDNESS
The hardness of tap water may vary from region to region. For this
reason, the appliance may be adjusted according to the degree of
hardness of the water in the place it will be used in; hardness is measured
on a scale of 1 to 4.
The appliance is already programmed for an average value
(hardness 3). The appliance setting should be adjusted according to
the actual hardness of the water, which can be measured using the test
strip provided.
Briefly dip (1 second) the test strip provided in water and
shake it gently. After one minute you can read the test results
on the strip.
• After accessing the programming mode press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select
the function:
WATER HARDNESS
and enable it by pressing "MENU/OK".
• The display will show:
WATER HARDNESS
HARDN 3
• Check the test strip previously immersed in water to see how many
squares have changed colour.
• Press "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " to select the correct water hardness (e.g. 2 squares
= Hardness 2) and memorise it by pressing "MENU/OK".
Caution: descale the appliance when the max water
hardness level is reached.
The display will show the message:
DESCALING
READY FOR USE
CUP HEATER PLATE
This function allows you to turn on the cup heater plate present in the
machine cover.
CUP HEATER
• In programming mode, select the function using the "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ "
button, and confirm using the "MENU/OK" button.
• It will thus appear the indication to choose whether you wish to
select
CUP HEATER
ON
using the "∧ ∧ ∧ ∧ ∧ " or "∨ ∨ ∨ ∨ ∨ " button, and confirm your choice using the
"MENU/OK" button.
TEMPERATURE
This function allows you to adjust the water temperature to obtain
hotter or less hot coffee (Minimum, low, medium, high and maximum).
• 35 •
ENGLISH
CUP HEATER
or
OFF