General Details; Safety Warnings; General; Warnings In Installation And Assembly Work - Astralpool SPA 4DREAM Manual De Funcionamiento

UTILIZATION MANUAL

1. GENERAL DETAILS

This manual contains all the information needed to
fully enjoy your SPA. We recommend that you take
some time to go over the points detailed below.
If you have any question or doubt on the operation or
maintenance of this product, please contact your local
dealer. They are professional specialists and their
knowledge will help you enjoying this product.
IMPORTANT: The manufacturer reserves the right to
modify part of the design or specifications without
prior notice and without entering into any obligation.

2. SAFETY WARNINGS

2.1. GENERAL

Avoid contact with electrical voltage
Carefully follow current regulations regarding
accident prevention.
Any modification on the equipment requires
prior authorisation from the manufacturer.
Original spare
authorised by the manufacturer guarantee
greater safety. The manufacturer of the
equipment is exempt from all liability for
damages caused by using non-authorised
spare parts or accessories.
During operation,
equipment are at dangerous electrical voltage
levels. Work on each element or equipment
can only be performed once it has been
disconnected from the mains and with the
start-up devices disconnected.
The user should ensure that assembly and
maintenance works
qualified and authorised persons, and that
they have carefully read the installation and
service instructions.
Safety in the operation of the machine can
only be guaranteed if installation and service
instructions are followed.
The limits indicated in the electrical control
panel cannot
circumstances.
Contact the
manufacturer or the local dealer of the
manufacturer in the event of malfunction or a
breakdown.
In this respect, the current regulations in each
country should be followed.
parts and accessories
some parts of
are carried out
be exceeded under
Technical Service of
There is a risk of flooding with this machine
and as a result it is recommended that the
Spa be installed in an area designed for
draining away run off or leaking water from
the machine (either from below or overflowing
water) as a result of using the product or from
possible leakage from any of the circuits.
(Consult
information)
This unit must be installed in an appropriately
prepared area that adequately provides easy
access to all the components of the SPA. The
Guarantee will not in any case cover any
building work required to position or relocate
the product. (Please see Guarantee).
electronic material, which at the end of its life-
span, should be suitably treated as special
waste. Contact your local authorities to find
out
procedure
material.
2.2. WARNINGS
ASSEMBLY WORK
Take particular care to ensure that water cannot
enter the pumps and live electrical parts.
the
2.3. WARNINGS IN MAINTENANCE WORKS
Before carrying out any electrical or mechanical
maintenance work, make sure that the machine is
disconnected from the mains, and that the start-
up devices are blocked.
Do not handle the equipment with wet feet.
by

2.4. AVOIDING RISKS OF HYPERTHERMIA

Prolonged, direct contact with hot water could
cause HYPERTHERMIA. This occurs when the
internal body temperature reaches levels above
the normal temperature of 36.5ºC.
Symptoms of hyperthermia are a sudden drop in
any
blood pressure resulting in a sensation of dizziness
with the possibility of fainting.
the
THE USE OF ALCOHOL, DRUGS OR
MEDICINES COULD INCREASE THE RISK OF
HYPERTHERMIA. IT IS NOT ADVISABLE FOR
PREGNANT WOMEN TO USE THE SPA.
2
the Guarantee
The Spa includes electric and/or
the collection and
for electric and
IN INSTALLATION
CONSULT YOUR DOCTOR
EN
for further
waste disposal
electronic
AND