Charging The Battery, Leds; Mounting The Charger On A Wall; Charging The Battery; Led On Charger - Stihl AL Serie Manual De Instrucciones

6 Charging the Battery, LEDs

6 Charging the Battery, LEDs
6.1

Mounting the Charger on a Wall

The charger can be mounted on a wall.
1 2
a
b
a
► Check the following points when mounting the charger on
a wall:
– Suitable fixing materials are used.
– The charger is level.
– The following dimensions are maintained:
– a = at least 100 mm
– b (for AL 101) = 75 mm
– b (for AL 300 and AL 500) = 120 mm
– c = 4.5 mm
– d = 9 mm
– e = 2.5 mm
6.2

Charging the Battery

The charging time depends on several factors, e.g.
temperature of the battery or the ambient temperature. The
actual charging time may differ from the specified charging
time. For specified charging times see www.stihl.com/
charging-times.
0458-511-9921-C
The charging process starts automatically
when the plug is inserted in a wall outlet and
the battery is fitted in the charger. The
charger switches itself off automatically when
the battery is fully charged.
The battery and charger heat up during the charging
3
process.
The STIHL AL 300 and AL 500 chargers have a built-in fan
which may cut in and out during the charging process.
d
e
e
1
► Insert the plug (6) in a convenient wall outlet (7).
The charger (3) runs a self test. The LED (4) glows green
for about 1 second and then red for about 1 second.
► Lay the connecting cable (5).
► Insert the battery (2) in the guides in the charger (3) and
press it home as far as stop.
The LED (4) glows green.
The LEDs (1) glow green and show the state of charge.
► If the LED (4) and the LEDs (1) stop glowing: Disconnect
the plug (6) from the wall outlet (7).
Battery is fully charged.
► Remove the battery (2).
6.3

LED on Charger

The LED indicates the operating status of the charger.
If the LED glows green, the battery is being charged.
3
2
4
English
7
6
5
17