Transport And Storage; Safety Measures - BEHA UNITEST Echometer 3000 Manual De Instrucciones

Transport and Storage / Safety Measures
The scope of supply comprises of:
1 UNITEST Echometer 3000
2 Test leads red/black
2 Alligator clamps
1 Carrying holster
1 Battery 9 V, IEC 6LR61
3 Concise reference guides
1 Instruction manual
Accessories:
Windows Software UNITEST "Report Studio"
Order No: 1207

2.0 Transport and Storage

Please keep the original packaging for later trans-
port, e.g. for calibration. Any transport damage due
to faulty packaging will be excluded from warranty
claims.
In order to avoid instrument damage, it is ad-
vised to remove accumulators when not using
the instrument over a certain time period. How-
ever, should the instrument be contaminated
by leaking battery cells, you are kindly re-
quested to return it to the factory for cleaning
and inspection.
Instruments must be stored in dry and closed
areas. In the case of an instrument being trans-
ported in extreme temperatures, a recovery
time of minimum 2 hours is required prior to
instrument operation.

3.0 Safety Measures

The UNITEST Cable Length Meters have been built
and tested in compliance with the valid Regulations
and have left the company in safe and perfect con-
dition. To maintain this condition, the user must
comply with the safety references contained in this
instruction manual.
Never apply voltage to any of the instrument
measurement ranges. Always verify that the
circuits are not live using a dual-pole volt-
age tester (e.g. UNITEST 2000 alpha)!
18
Prior to any operation, ensure that connecting
leads and instrument are in perfect condition.
The respective accident prevention regulations
established by the professional association for
electrical systems and equipment must be
strictly met at all times.
The instrument may only be used within the op-
erating ranges as specified in the technical data
section.
Prior to opening, the instrument has to be
switched off and disconnected from any cir-
cuit.
Avoid any heating up of the instrument by di-
rect sunlight to ensure perfect functioning and
long instrument life.
Appropriate Usage
The instrument may only be used under those
conditions and for those purposes for which it
was built. For this reason, in particular the safe-
ty references,as well as the technical data in-
cluding environmental conditions and the
usage in dry environments must be followed at
all times.
The operational safety of the instrument is noi
longer guaranteedafter unauthorised modifi-
cations or changes.
The instrument may only be opened by an au-
thorised service technician, e.g. for fuse re-
placement.