Lcd Display - PATONA BLUE E-Scooter PT13-1 Manual De Instrucciones

1.4. LCD Display

(1) Battery: Remaining battery capacity (4 bars = 100%)
(2) Level: The maximum achievable speed per level can be set with SPEED + or SPEED-.
Level 1: Slow (ECO)
(3) Distance: Shows the distance covered in kilometers.
(4) Speed: Shows the current speed in km/h.
2. Operating
2.1. ON-/OFF
1. Press and hold the ON/OFF button for 2 seconds to switch the scooter on or off.
2. If you press the ON/OFF button briefly for 0.5 seconds, you can switch between different
views.
2.2. Drive and brake
1. Switch on the E-Scooter.
2. Stand with one foot on the board.
3. Manually kick the scooter forward for initial speed. Warning, the electric motor drives
forward when you push the E-Scooter and use the accelerator lever.
4. The accelerator lever is located below the control element. Press the lever down to
accelerate and release it to slow down.
5. To apply the front brake, pull the brake lever.
6. Lightly step on the rear fender to assist braking.
Level 2: Medium (MID)
14
Level 3: Fastest (HIGH)