Luvion Platinum Manual De Instrucciones página 28

If you have problems with the system, there is often a quick and simple
solution. Please try the following:
Problem
No picture from a camera
EN
The picture is dropping
Audio problems
The picture is or has become choppy
The Picture appears to be grainy when
using AV out function to view on a large
screen TV/monitor
28
platinum user manual ALL .indd 28
Troubleshooting
Solution
1 Check all connections to the camera. Make sure
the adaptor is plugged in.
2 Make sure that the cameras and receiver are
both ON.
3 Make sure that the camera is in range of the
receiver.
4 If using the battery adaptor, try replacing the
batteries
1 Move the camera closer to the receiver.
2 Try repositioning the camera, receiver or both
to improve the reception.
3 Adjust the monitor antenna to vertical position.
1 Ensure that the volume on the TV is on.
2 Make sure that there is sound within range of
the camera microphone
3 If the unit emits a loud screeching noise (feedback),
move the camera or receiver farther apart.
The picture may become choppy when expe-
riencing a lower frame rate (i.e. 10 frames per
second vs. a higher 20 frames per second).
1 Try moving the camera closer to the receiver.
2 Remove obstructions between the receiver
and camera.
3 Adjust the monitor antenna to vertical position.
The purpose of the AV output is for convenience
only. When using with large screen TV/monitor,
the picture might be grainy as the camera limits
video resolution to VGA (640x480 pixels). This is
not a product defect.
1 For best performance use with TV/monitor
PIP (Picture in Picture) function. Check your TV/
monitor product manual to see if this feature is
available on your TV/monitor.
2 View video on a smaller screen TV/Monitor
4-11-2009 17:17:42