Maintenance; Cleaning And Disinfection - Auxilab Fugelab-GB10 Manual De Usuario

The calculation of the centrifugal force depends on the centrifugal speed and centrifugal
radius. It's based on the following equation:
Being 1.118∙10
r= rotation radius, horizontal distance (cm) from the rotation axe to the bottom of
the tube.
n= rotation speed (rpm)
5

Maintenance

th

5.1 Cleaning and disinfection

Users have the responsibility to do appropriate cleaning if hazardous materials spill
out or into the device.
5.1.1 Steps to do cleaning
R
egular (or according to using situation) cleaning and maintenance is for the shell
of the centrifuge, cavity, rotor, container used for separation, etc, to prevent
contaminants and corrosion caused by used components and environmental pollution.
Versión 08 Enero 2018
R.C.F.= 1.118∙10
a constant.
-5
Users should do the cleaning and disinfection
according to this manual to prevent damage to the
machine. Using inappropriate cleaning agents or following
wrong disinfection procedures may lead to damages to
the centrifuge or internal components.
Please turn off the power switch and unplug the
power cord before the cleaning or doing maintenance of
the centrifuge.
∙r∙n (×g)
-5 2
Pág. - 40 -