Rinse Aid Dispenser; Detergent Dispenser (Optional) - ASBER TECH-H500 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
asberprofessional.com
5.1.6

Rinse aid dispenser

The machine you have purchased is fitted with a mechanical rinse aid dispenser; an electrical dispenser is
available on request.
5.1.6.1 Mechanical rinse aid dispenser. 
Operation: This dispenser absorbs the rinse aid when it detects a loss in pressure during rinsing. That is,
when the filling solenoid valve closes, a vacuum is created that makes the rinse aid dispenser absorb the
fluid to which it is connected.
Settings: The dispenser should be adjusted when the machine is installed to ensure that the wash is opti-
mised from the start. The setting should be adjusted according to the type of rinse aid and the water hard-
ness.
5.1.6.2 Electric rinse aid dispenser. (ONLY MODEL W) 
Operation: this dispenser absorbs the rinse aid when the electronic programmer gives the order to rinse.
The rinse aid is inserted in the BREAK TANK, to then be mixed with the rinse water from the boiler.
Settings: The dispenser should be adjusted when the machine is installed to ensure that the wash is opti-
mised from the start. The setting should be adjusted according to the type of rinse aid and the water hard-
ness.
 
5.1.7

Detergent dispenser (Optional).

This ensures that the correct measure of detergent is supplied to the machine.
Installation: the detergent dispenser output must be in the tub of the machine, above the maximum water
level. Please see the electrical circuit diagram for details of the electrical connection. The tub should have
an opening in which the dispenser is fitted. If this is not the case, make a Ø12 hole above the maximum wa-
ter level to mount the corresponding bushing.
Operation: the detergent dispenser is activated when the machine is taking water, whether it is in rinse cy-
cle or whether it is filling.
Settings: the measure of detergent used should be adjusted when the component is installed to ensure
that the wash is optimised from the start.
 
 
46
asberprofessional.com
ASBER recommends that the rinse aid product and the dispenser 
setting are defined by a technician specialised in the use of chemical 
products in order to ensure a more efficient wash.
ASBER recommends that the detergent and the dispenser setting are 
defined by a technician specialised in the use of chemical products in 
order to ensure a more efficient wash.
  
 
 
ENGLISH
 
 

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tech-h500 hp

Tabla de contenido