Safety Precautions - HQ -SOLDER01 Manual De Uso

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Do not expose the product to water or moisture.
Unplug the soldering iron when not in use.
Do not place any flammable object in the nearness of the hot soldering iron.
Use the soldering iron only at the mentioned voltage.
Permit nobody to touch the tool or the cable.
Do not use the soldering iron for purposes it is not intended for.
Danger of burn by liquid solder, protect yourself against tin splashed with protective
goggles.
Use the soldering iron in a ventilated room.
Always take care of the cable in nearness of heat, oil and sharp edges.
Use a clamping device to secure the soldering material.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the
product or damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their
respective holders and are hereby recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and
electronic products should not be mixed with general household waste.
There is a separate collections system for these products.
Copyright ©
Protect yourself against an electric shock.
To reduce risk of electric shock, this product
should ONLY be opened by an authorized
technician when service is required. Disconnect
the product from mains
4