Cleaning And Maintenance; Cleaning The Buckle - Foppapedretti Iturn duoFIX Instrucciones De Montaje

6. CLEANING AND MAINTENANCE

6.1 Cleaning the buckle

For child safety it is essential that the harness buckle works properly. Generally, any
buckle malfunctions can be attributed to an accumulation of dirt or foreign bodies.
Below are some possible malfunctions:
•
The buckle tips do not slide out easily when the red release button is pressed;
•
The tips do not attach (or slip out constantly each time you try to insert them;
•
The tips are attached without the "click" sound being emitted;
•
Inserting the tips is difficult (a sort of resistance is noticed);
•
You need to press down hard to open up the buckle.
Solution
Wash the harness buckle so as to restore its correct functioning:
Cleaning the harness buckle
1. Follow the instructions given in par. 4.8 to remove the harness.
2. Soak the buckle in warm water with washing-up liquid for at least an hour, then
rinse and leave to dry (fig. 62).
6.2 Cleaning
The lining can be removed and washed. Follow the
instructions shown on the washing label of the lining.
How to remove the lining: remove the harness first (see
par. 4.8) and then the lining (fig. 63 and 64). Follow the lining
removal steps in reverse order to reposition it.
6 3
6 3
• ENGLISH •
CLEANING AND MAINTENANCE
6 4
54
WARNING! DO NOT use the car seat
without the fabric lining properly.
WARNING! Never use the car seat if
6 4
the 5- point harness, for use in group
0+/1, is not assembled and attached
to the car seat;
IMPORTANT: Make sure that the
harness belts are not twisted.
6 2
6 2