Dvb-S Nim - Alcad 915 Serie Manual Del Usuario

DVB-S NIM

This is used to configure the parameters corresponding to the input satellite transponder and to select the
TV/radio services to be broadcast.
Input selection
Enables power to the LNB and configure the DiSEqC 2.0 parameters.
LNB Supply: Used to activate the power supply to the LNB. The SS module feeds it with +13
/+18 (0/22 kHz). In case of DiSEqC 2.0. commutation, it is required to introduce the rele-
vant Satellite, Polarity and Band parameters. If the module is connected directly to a pola-
rity, it is sufficient to activate the power supply of the LNB of the module which is connected
directly to the polarity. (On, Off)
Satellite: Satellite input selection.
Band: Low, Hight.
Polarity: Vertical, horizontal.
Force DiSEqC Only: Checking this box, the module will enable only DiSEqC commutation.
ENG
ALCAD IPTV web configurator manual - 59