Getting Started - Bresser 4Cast CS Manual De Uso

GETTING STARTED

• Insert 2 pcs. AA batteries into the remote sensor fi rst. (before taking the weather station in
operation).
• Now connect the weather station to the power socket (power supply). The main unit will automa-
tically scan for the radio-controlled clock signal and the Meteotime Weather signal when started.
• The time and date signal will be received in a few minutes. Since there is a large amount of
Weather information for all regions and days, the unit needs about 24 hours from the time of
the initial setup to complete the reception of all data.
• After receiving the DCF77 radio signal, the weather station tries to receive the radio signal of
the outdoor sensor. The wave symbol (reception symbol) fl ashes. Upon successful reception,
the readings for temperature and humidity are displayed.
• If the unit is able to receive the Meteotime signal successfully, the Meteotime icon
appear in the second row of the display. Otherwise, it will be
means it is able to receive the
Meteotime weather signal. Otherwise,
it will be .
◄
means it is successfully receives
today's weather information. Otherwise, it
will be .
29
.
◄
GB/IE
will