Bresser 4CAST LT Manual De Uso página 25

In the event the Meteotime icon change to
unit. The sources of interference may come from the electronics equipment such as TV-set, computers,
household machines etc. It may also be due to lots of concrete, metal parts and electrical equipment in the buil-
ding. It may also be due to your living area if it is very far away from the Radio-controlled clock tower.
By the fi rst time you power up this product, the language default setting is in German Language. In order to
change it into another language such as English, Spanish, French, Italian, Dutch or Swedish, please follow the
setup as below.
*** METHOD #1 ***
When you put in the batteries for the fi rst time, wait until the Main unit receives
• SUCHE SIG. (Meaning in English SEARCH SIGNAL); It is shown in the INFORMATION WINDOW
• After several second, „ LAND EINST „ (meaning in English COUNTRY) is shown in the Information Window.
• Press [ SET ] and „ZONE +00 H „ is shown in the Information Window
• Now press [ SET ] again and the language will be shown in the Information Window. Press
[ ] or [ ] key to select your desired language. There are total of seven Languages to select, namely
German, English, Spanish, French, Italian, Dutch, Swedish
• Press [ SET ] again two times to exit the setup
*** METHOD #2 ***
If you skip the above-mentioned step, the INFORMATION WINDOW will show the default city FRANKFURT.M. You
can change than the language it in the follow step.
• Press and Hold [ SET ] for 3 seconds, „ LAND EINST „ (meaning in English COUNTRY) is shown in the
Information Window.
• Press [ SET ] again and „ZONE +00 H„ is shown in the Information Window,
• Press [ SET ] again and language will be shown in the Information Window. Press [
[ ] key to select your desired language. There are total of seven Languages to select, namely German,
English, Spanish, French, Italian, Dutch, Swedish.
• Press [ SET ] again two times to exit the setup
, that means there are potential sources of interference on the
25
GB/IE
] or