Overall Dimensions; Specified Conditions Of Use - Cormach LIGRO Manual De Uso

OVERALL
DIMENSIONS
min. 915
max. 1090
1700
1320
min. 1490 - max. 1700
Operator's manual Ligro - Ligro GT
CONDITIONS OF USE
This tyre changer has been designed ex-
clusively for mounting and demounting
tyres, using the tools with which they are
equipped as described in this manual.
WARNING
Any use other than those described in this
manual is to be considered improper and
unreasonable.
The machine is equipped with an inflation
system independent of all the other func-
tions described above. Take great care when
using it (read the INFLATION chapter).
Figure 7 shows the operator's positions
during the various work phases:
A Bead breaking
B Tyre demounting and mounting
C Inflation area.
WARNING
6
Column tilting must be performed from
work position C (fig.7), keeping the hands
away from moving machine parts.
WARNING
To stop the machine in an emergency:
- disconnect the power supply plug;
- isolate the compressed air line by
disconnecting the shutoff valve (quick-
SPECIFIED
C
A
B
7
UK
41