Danger Warning Decals; Bead Breaking; Deciding From Which Side Of The Wheel The Tyre Must Be Demounted - Cormach LIGRO Manual De Uso

25 Doyfe connector (fits onto tyre valve
for inflation)
26 Tyre inflation gun&gauge
WARNING
For technical characteristics, warnings,
maintenance instructions and all other
information concerning the air tank,
consult the relative usage and mainte-
nance manual provided with the machine
documentation.

Danger warning decals

Risk of crushing.
Never insert body parts
between the bead break-
ing shoe, rim and rim
support.
When locking the rim
on the turntable, never
insert your hands be-
tween the rim and the
clamp gripper.
NEVER stand behind
the machine.
NEVER insert your
hands between the
wheel and the head
when lowering the head.
44
Danger: electric voltage

BEAD BREAKING

WARNING
Noise levels may reach 85 dB(A) during
this procedure. Therefore we advise ope-
rators to wear hearing protection devices.
Deciding from which side of
the wheel the tyre must be
demounted
Fig. 9
A
B
C
A Narrow side - Side for mounting the tyre
B Rim well
C Wheel
D Wider side - You cannot mount tyres
from this side
The two sides may be almost identical,
but only the narrow side serves for tyre
mounting and demounting
Identify the side for tyre mounting and make
sure that this side is facing upward when you
install the tyre on the table top (i.e. facing
toward the mount/demount head)
Operator's manual Ligro - Ligro GT
D
9