Mounting - Cormach LIGRO Manual De Uso

50
NB: With tyres with soft walls, the lever
supplied may also have to be inserted
to facilitate demounting (fig. 20).
Grip the lever firmly when using.
- Lift the second bead manually over the
head, then turn the turntable clockwise
until the tyre has been completely de-
mounted from the rim.
18
- Tilt the column backwards.
NOTES: for tyres with an air chamber,
after disassembling the upper bead, tilt
the column backwards and remove the air
chamber before continuing to disassemble
the lower bead.
The rotation of the turntable can be
stopped at any moment by releasing the
drive pedal.
For rotation in the opposite direction, just
lift the pedal.
Always check that the tyre size is compa-
tible with the rim size before mounting.
- Before you start with tyre mounting op-
erations, lubricate the beads (fig.21).
Lubricated beads require less force to
mount/seat and are protected against
19
torsional damage.
Operator's manual Ligro - Ligro GT
WARNING

Mounting

WARNING
20