Cormach LIGRO Manual De Uso página 52

- Check that the tyre is in good condition
with no signs of damage.
- Place the tyre over the wheel and tilt the
tower forward.
- Place the lower bead (fig.22) under the
right hand part of the head.
- Press the turntable control pedal to rotate
clockwise and mount the bead.
- Taking advantage of the drop centre,
press on the right hand tyre wall head to
Operator's manual Ligro - Ligro GT
reduce tension on the bead as the wheel
rotates (fig.22).
- Once you have mounted the bottom
bead, repeat the same steps for the up-
per bead (fig.23).
21
NOTE: Ensure that the bead passes over
the tail of the head (Fig. 24)
22
- Tilt the column backwards, release the wheel
and remove it from the tyre changer.
23
UK
24
51