Diagnostics And Troubleshooting - Tecno-gaz MULTISTERIL 2200S Manual Del Usuario

Problem
The cleaner does not
turn on.
The cleaner works,
but ultrasonic
capacity is notably
reduced.
You pressed but
the cycle doesn't
start.
Diagnostics and troubleshooting:
Cause
No power.
Power cable unplugged.
Blown fuse.
Machine breakdown.
Inappropriate liquid detergent.
Degraded or dirty solution.
Deposits of soiling residues on the
bottom of the tank.
Basket loaded too heavily.
The cleaner is discharging.
Solution
Check power supply.
Plug in the power cable.
Replace fuse – if problem
persists
authorized service centre.
Contact a service centre.
Use a detergent suitable for
the type of soiling to
remove.
Replace excessively used
solution.
Clean the tank with hot
water and a soft cloth (with
hard‐to‐remove dirt use a
product
stainless steel).
Process multiple lighter
loads instead of one heavy
load.
Wait for discharge to finish.
21
ENGLISH
contact an
for cleaning