Warning For The Safety Of People And Property; General Points; Product Description - ESPA evopool SilenPlus Manual De Instrucciones

INSTRUCTION MANUAL (Translation from the original Spanish)
Safety instructions for preventing injury and damage to people and property
A Warning! Observe limitations of use.
B The name plate voltage must be the same as the
mains voltage.
C Connect the unit to the mains via an omnipolar
switch with at least a 3 mm opening between con-
tacts.
D Install a high-sensitivity differential switch (0.03A)
as extra protection against lethal electric shocks.
E Connect the unit to the ground.
F Use unit only within performance limits indicated
on the name plate.
G Remember to prime pump.
H
Check for motor self-ventilation.
Contents
Warning for the safety of people and property ........ 8
1. General points .................................................... 8
2. Handling .............................................................. 9
3. Installation .......................................................... 9
4. Start-up ............................................................... 9
5. Operation .......................................................... 10
6. Configuration .................................................... 10
7. Built-in timer ...................................................... 11
8. Maintenance ..................................................... 11
9. Declaration of compliance ................................ 11
10. LED indicators .................................................. 12
11. Illustrations........................................................ 28

Warning for the safety of people and property

The following symbol
graph indicates the possibility of danger as a result
of not following the corresponding instructions.
DANGER
Not following this instruction
electrocu- leads to a risk of electrocu-
tion risk tion.
DANGER Not following this instruction
leads to a risk of injury to
people or damage to prop-
erty.
WARNING
Not following this instruction
leads to a risk of damage to
the pump or the installation.

1. GENERAL POINTS

This manual is complementary to the standard in-
stallation manual for the swimming pool pumps.
The instructions we provide are intended to ensure
the proper installation and optimum performance of
swimming pool water circulation pumps equipped
®
SilenPlus
with frequency
®
ControlSystem
valve position sensor.
(See figure 8)
I This apparatus may be used by children 8 years
or older and persons with reduced physical, sen-
sory or mental capacities, or lacking experience
and knowledge, if they are supervised or receive
adequate training on the safe use of the appara-
tus and understand the dangers.
Children should not be allowed to play with the
apparatus.
Children should not perform the ordinary clean-
ing and maintenance tasks without supervision.
J Be careful with hazardous liquids and environ-
ments.
K Caution! Look out for accidental leaks.
Do not expose pump to bad weather.
L
Caution! Avoid icing.
Cut out power supply before servicing pump.

1.1 Product description

SilenPlus pumps equip a standard electric motor
with a built-in frequency inverter. They are designed
for a single phase connection.
They have a radio-frequency transmitter to commu-
beside a para-
nicate with the ControlSystem
connection for remote control using smartphone
applications.
The ControlSystem
for a standard swimming pool filter 6-way multiport
valve. It is equipped with electronic sensors for po-
lar positioning and to control the motor.
The joint working of SilenPlus pumps and the
ControlSystem enables full control of the pump
functions just by operating the filter valve.
1.2 SilenPlus Evopool
Filtration Plus:
ness of pool surface cleaning.
EFFECTIVENESS: work cycles specially developed
for use in pools achieve maximum effectiveness.
inverter and
SAVINGS: a minimum of 80% electricity savings
8
Read these instructions before installing.
Keep them for future reference.
Following the installation and usage instruc-
tions and the electrical connection diagrams
correctly ensures that the equipment will
work properly.
Ignoring any of the instructions in this manual
can lead to all kinds of consequences for
which we accept no responsibility.
®
sensor is the position detector
®
functions
System which achieves filtration opti-
misation to increase efficiency, with the
resulting electricity saving, while ad-
ding a cycle to increase the effective-
EN
® ®
and a Bluetooth