Quick Freezing - Koenic KFZ 45221 A2 NF Manual De Instrucciones

Size - A5
English
Installation
Note:
The installation should be performed by at
least 2 persons to avoid dangerous.
Place the unit on a level and stable
Fig.
1
surface. Keep the minimum distances
to all sides.
Unevenness can be compensated with
Fig.
2
the adjustable front feet.
The refrigerator/freezer is equipped
Fig.
3
with drawers and glass shelves.
The lower 5 drawers and the glass
shelves can be removed. If removed,
large or small pieces (e.g. beef legs or
small side of pork) can be stored.
Operation
Fig. Plug in the power plug into an
4
appropriate mains socket outlet.
Set mode and temperature
Note: The unit can be operated only in
Fig.
5
refrigerator or freezer mode.
Press and hold the FRIDGE / FREEZER
mode selection button for 3 seconds to
select the mode.
Use the temperature selection button
to select the desired temperature.
Temperature for the setting
Mode
1
2
3
4
5
6 Quick cooling Quick freezing
18
IM_KFZ45221-A2-NF_190315_V06_HR.indb 18
Fridge Freezer
8 °C -16 °C
6 °C -18 °C
4 °C -20 °C
3 °C -22 °C
2 °C -24 °C
Quick cooling mode
Under fridge mode, select with the
button until the
Note: During this mode, the fridge runs
with the preset temperature at 2°C and
it will exit this mode automatically after
150 minutes or when changing mode
or temperature setting.

Quick freezing

Under freezer mode, select with the
button until the
Note: During this mode, the freezer
runs with the preset temperature
at -24°C and it will exit this mode
automatically after 24 hour or when
changing mode or temperature setting.
Adjust the side of the hinges
Attention
Make sure that the freezer stands safe
during work and cannot tilt.
Note:
• If necessary, and if the premises require
it, the mounting of the doors can be
changed. To do this, follow all the following
instructions in the given order.
• The following tools are required:
Socket wrench 8 mm, wrench 8 mm, phillips
screwdriver, slotted screwdriver. Due to
the uniqueness of the appropriate tools,
those are not mentioned separately in the
following instructions.
• For this work a different hinge holder and
cover are needed, which are provided with
the unit.
symbol lights on.
symbol lights on.
15/3/2019 11:12