Preparing A Cappuccino - melitta Caffeo CI Manual De Instrucciones

Ocultar thumbs Ver también para Caffeo CI:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
Filling the bean container
Warning!
Hazard for persons allergic to
caffeine.
Since a residual quantity of the
previously used beans remains above
the grinder, the two types of beans
mix when changing to a different bean
type. Consequently, when switching
over to decaffeinated beans, the first
two cups may still contain coffee that
is not decaffeinated. This means that
only the third cup of coffee prepared
after the switchover is free of caffeine.
The 2-chamber "Bean Select" bean
container can be filled with two different
types of coffee beans. Change the coffee
type by using the tilt lever.
• Fill bean container 7 with fresh coffee
beans (max. 135 g per chamber).
• Select the desired bean type by setting
the tilt lever to the appropriate chamber.
Switching the appliance on and off
• Place a vessel under outlet 3.
• Press the ON/OFF button
the appliance on or off. If necessary, the
appliance performs an automatic rinsing.
BA_CI_082016.indd 25
Preparation
• Fill the water reservoir with fresh water
every day. The water reservoir must
always be filled with enough water for
the operation of the appliance.
• Fill the bean container preferably with
espresso beans or bean mixtures for
fully automatic coffee machines.
Do not use any ground, glazed,
caramelised or otherwise sugar-coated
coffee beans.
• Beverage dispensing stops automatically
when the set dispensed quantity is
reached.
• Beverage dispensing can be stopped
prematurely by pressing the respective
button again.
Two options are available for the
preparation:
• Standard: Change the settings such as
coffee strength or quantity directly when
dispensing.
• My-Coffee: Call up saved settings with
the
Preparing Café Crème or Espresso
to switch
• Switch on the appliance.
• Place a vessel under outlet 3.
• Press the
strength.
• Press the
or
button (for Café Crème). The
grinding process and coffee dispensing
starts.
• The dispensed quantity can be adjusted
or prematurely stopped by turning the
rotary switch.

Preparing a cappuccino

• Switch on the appliance.
• Place a vessel under outlet 3.
button (Page 27).
button to set the coffee
button (for Espresso)
25
21.09.2016 07:24:42

Publicidad

Tabla de contenido
loading

Tabla de contenido