Cleaning And Maintenance; Daily Cleaning - melitta Caffeo CI Manual De Instrucciones

Adjusting the grinding
fineness
The grinding fineness level was optimally
adjusted prior to delivery. It is therefore
recommended to only adjust the grinding
fineness after about 1 0 00 coffee
preparations (about 1 year).
The grinding fineness can only be set
while the mill is running. Thus, the
grinding fineness should be adjusted
directly after coffee dispensing starts.
If the coffee flavour is not sufficiently
intense, it is recommended to set a finer
grinding level.
Place the lever 14 in one of the three
positions (as viewed from the rear of the
appliance).
Lever position
Left
Middle
Right
BA_CI_082016.indd 31

Cleaning and maintenance

– Pull the power supply plug before
– Never immerse the appliance in
– Do not use a steam cleaner.

Daily cleaning

• Wipe the outside of the appliance with a
• Empty the drip tray.
• Empty the coffee grounds container.
Cleaning the brewing unit
It is recommended to clean the brewing
Grinding fineness
unit once a week.
Fine
• Switch off the appliance.
Medium
• Pull off the cover 13 to the right.
Coarse (factory
setting)
• Press and hold the button on the handle
• Turn the handle clockwise until the stop.
• Pull the brewing unit out of the appliance
• Rinse the brewing unit thoroughly on all
• Let the brewing unit drip dry.
• Remove coffee residues from the
• Insert the brewing unit back into the
• Insert the cover until it clicks in.
Warning!
cleaning.
water.
soft damp cloth and normal dishwashing
liquid.
of the brewing unit (Image E).
by the handle.
sides with clear water. The area shown
in Image F (arrow) must be free of
coffee residues.
appliance.
appliance, press (and hold) the red
button (Image E) and turn the handle of
the brewing unit counterclockwise until
the stop.
31
21.09.2016 07:24:42