Tabla de contenido
Publicidad
157
Anhang
Hinweise zur elektromagnetischen
Verträglichkeit (EMV)
Recommended separation distances between portable and mobile RF communications equipment and the
IMAGE 1 HUB™ HD (22201020-1xx) or IMAGE 1 Pure HD (22202020-yyy)
The IMAGE 1 HUB™ HD (22201020-1xx) and IMAGE 1 Pure HD (22202020-yyy) are intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or user of the units scan help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment (transmitters) and the units as recommended below, according to the maximum
output power of the communications equipment.
150 kHz to < 80 MHz
Rated maximum out-
put power of trans-
⎡
=
mitter
d
⎢
⎣
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using
the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects
and people.
Appendix
Electromagnetic Compatibility (EMC)
Information
Table 206
Separation distance d [m]
according to frequency of transmitter
80 MHz to < 800 MHz
3
5 .
3
5 .
⎤
⎡
⎤
=
P
d
⎥
⎢
⎥
3
3
⎦
⎣
⎦
0.12
0.12
0.38
0.38
1.2
1.2
3.8
3.8
12
12
Anexo
Indicaciones sobre compatibilidad
electromagnética (CEM)
800 MHz to 2.5 GHz
7
⎡
=
P
d
⎢
3
⎣
0.23
0.73
2.3
7.3
23
⎤
P
⎥
⎦
Publicidad
Tabla de contenido
