BURG-WACHTER secuENTRY 5710 Manual De Instrucciones página 6

Dear customer,
Thank you very much for your decision for
the electronic lock system manufactured by
BURG-WÄCHTER. Depending on the system,
different opening devices are available.
Here, you are receiving the opening device
secuENTRY TRANSPONDER
The secuENTRY TRANSPONDER can be
registered directly to the cylinder but can also
be registered to the system with the optional
secuENTRY SOFTWARE. For this you require the
enclosed QR-Code.
Attention: In case the QR-Code is lost
or damaged, usage with the secuENTRY
SOFTWARE will not be possible.
Our hint: The QR code can also be stored in an
electronic form as a scanned file or a photograph on
a protected data carrier.
The procedure can be found in the user guide of the
secuENTRY SOFTWARE
Opening with transponder
– Hold the transponder from the front at no more
than 1 cm from the cylinder knob. The LED
integrated in the cylinder flashes once when the
opening is successful.
– Turn the cylinder knob.
When using the opening procedure with
a transponder, please note that the keypad
should not be previously activated using
the key!
6 | Englisch secuENTRY Transponder