Unold 48010 Instrucciones De Uso página 21

Problem
The bag cannot be sealed.
No vacuum can be created in the
container.
The vacuum bottle stopper does not
create a vacuum.
The appliance is working but can not
seal the bag.
If you have any questions, our after sales service will be glad to assist you.
After Sales Service, Germany
Mannheimer Straße 4
68766 Hockenheim
solution
ƒ Check to make sure that the cover of the vacuum
packing machine is properly closed. If the cover is
loose, the appliance will continually create a vacuum
and cannot seal the bag or container.
ƒ Remnants of fat, liquids, crumbs, etc. in the vicinity
of the sealing strip can keep the bag from sealing.
Open the bag, clean the affected area thoroughly and
seal it again.
ƒ Check to make sure that the arrow on the lid of the
container is set to "Vacuum".
ƒ Make sure that the hose is correctly connected.
ƒ Check to make sure that there is at least 1 cm of
space between the contents and the top edge of
the container, since otherwise no vacuum can be
created.
ƒ Make sure that the container and the lid are not
damaged by hairline cracks. Hairline cracks can
cause the container to leak, and no vacuum can
be created. In this case, the container has to be
replaced.
ƒ Make sure that the vacuum bottle stopper is properly
inserted in the bottle. If it is too loose, air can enter
the bottle, preventing a vacuum from forming.
ƒ Make sure that the edge of the bottle and the bottle
stopper are undamaged and free of fat, crumbs, etc.
Impurities on the bottle stopper or the bottle can
prevent a vacuum from forming.
ƒ Make sure that the hose is correctly connected.
ƒ When the appliance is working time too long, the
heating thread is overheated. In order to ensure
the machine safety and the sealing performance,
the heating thread is stopped by the temperature
controller. In this case please stop the appliance
working for about two minutes; the heating thread
will cool down. Then restart the appliance.
Tel.: +49 (6205) 94 18-27
Fax: +49 (6205) 94 18-22
E-mail: info@unold.de
http://www.unold.de
21